Support page for of
SLM1m 2.6L cases
Assembling a computer requires certain knowledge and skills! This brief instruction shows the assembly sequence and is designed for the user who has already assembled computers .
Also, the case in these photos may be a little different from what you have, it happens, I make some changes in almost every batch.
-
Make sure your assembly components match the case specifications.
Disassemble the case by unscrewing the screws with a screwdriver.
-
The case supports the installation of HDPlex 250W GaN AIO modules.
Connect the necessary cables to the power supply unit and screw it to the case with screws.
-
Installing the motherboard (MB).
The case supports MB mini-ITX format. Read the instructions for the motherboard. Install everything you need on it (Processor, CPU cooler, RAM, NVMe drive, if used. Follow the instructions of the component manufacturer). Install the plug in the case if it is not fixed on the motherboard before mounting the MB. Very carefully put the MB into the case, placing it on the racks. Screw the MB to the case using screws.
After installing the MB, install and screw the C14 connector to the case.
-
Installation of 2.5" Storage .
Skip this step if you don't plan to use a 2.5" drive.
One 2.5" drive can be installed above the cooler
*the thickness of the drive reduces the permissible height of the CPU cooler.
Connect the interface to the drive. Screw the drive to the case.
-
The final collection.
Carefully route all cables using nylon cable ties. Check that all cables are connected. Install the cover on the body and fasten with screws.
