top of page

Support page for the

SLM1 3.7L model

 
 

Assembling a computer requires certain knowledge and skills! This brief instruction shows the assembly sequence and is intended for the user who has already assembled computers.


And also, the case in these photos may be a little different from what you have, it happens, I make some changes in almost every batch.

7.jpg
8.jpg

  • Preparation.

    Make sure your assembly components match the case specifications.

    Disassemble the case by unscrewing the screws with a screwdriver.

 
10.jpg

  • Installing a video card.
    Skip this step if you are building without a video card.

    Unscrew the fastening corner from the case. Connect the additional power supply of the video card, if provided by the video card manufacturer, before installing it (see the instructions for installing your video card in the video card delivery kit). Insert the video card into the case, install the cable in the PCIe x16 riser connector as far as it will go. Screw the video card to the case using the mounting bracket.

  • Installing the motherboard (MB) .

    The case supports MB mini-ITX format. Read the instruction manual for the motherboard. Install everything you need on it (Processor, CPU cooler, RAM, NVMe drive, if used. Follow the instructions of the component manufacturer).

    Install the plug in the case if it is not fixed on the motherboard before mounting the MB. Connect the riser cable to the motherboard if you plan to install a video card. Very carefully put the MB into the case, placing it on the racks. Screw the MB to the case using screws and a screwdriver.

 
 
11.jpg
12.jpg
13.jpg

  • Installation of the Power Supply Unit (PSU) .

    The case supports the installation of HDPlex 250W GaN AIO modules.

    Connect the necessary cables to the power supply unit. Screw it to the body with screws and don't forget to screw the C14 connector to the body.

 
​
17.jpg
14.jpg
18.jpg
1.jpg

  • And at the end, I will talk about case fans

    So, if you really want to experiment and you don't mind removing the fan shroud with your LowProfile RTX 4060, then this information is for you. The purpose of installing fans instead of the standard cooling system is to reduce noise and temperature.

    Dismantle the standard cooling system of the video card.

    Attach a pair of 80x80x25 fans, preferably Noctua, to the special mount, with others it is unlikely to achieve good results.

    Install the bracket with the fans in the case and fasten it with screws. It is better to connect the fans to the video card using a special adapter. It can also be connected to the motherboard. After that, it is necessary to adjust the fan speed programmatically to achieve optimal values.

 
15.jpg

  • The final assembly.

    Carefully route all cables using nylon cable ties. Check that all cables are connected. Install the cover on the body and fasten with screws.

 
 
 
20.jpg

  • This photo shows how to screw the stand for vertical installation of the case.

 
 
 
bottom of page