Support page for
of SLM4 10L cases
Assembling a computer requires certain knowledge and skills! This brief instruction shows the assembly sequence and is designed for the user who has already assembled computers.
And also, the case in these photos may be slightly different from what you have, it happens, I make some changes in almost every batch.
-
Preparation.
Disassemble the case by unscrewing the screws.
Make sure your components match the case specification.
-
Installation of the Power Supply Unit (PSU).
The case is compatible with PSU SFX and SFX-L formats.
Screw the PSU to the mount on the body, it is not necessary to dismantle the mount. Turn on the power cable with an angle connector to the PSU. Set the mains switch on the PSU to the "on" position, if present.
-
Installing a mini-ITX motherboard (MB).
Read the instructions for your MB. For your convenience, install everything you need on it (Processor, CPU cooler, RAM, NVMe drive, if used. Follow the instructions of the component manufacturer).
Install the plug in the case, if it is not fixed on the motherboard, before mounting the MB. Connect the PCIe riser cable to the MP if you plan to install a video card. Screw the MB to the case using screws and a magnetic screwdriver. -
Also, mini-DTX, micro-ATX, ATX format MB can be installed in this case.
To install them, screw the necessary racks from the package of the case to the case. Read the VIDEO CARD COMPATIBILITY guide.
-
Width:
default - maximum triple slot (~ 62 mm)
with an ATX, m-ATX or m-DTX board - max. two slots (~42 mm) or 2.5 slots (~52 mm) if the height is less than 120 mm -
Length (for 2-slot GPU):
by default - 370 mm
with a 120 mm SRO radiator - 245 mm
with a 92 mm SRO radiator - 270 mm -
Length (for a 3-slot video card):
by default - 370 mm
with a 120 mm SRO radiator - 245 mm
with a 92 mm SRO radiator - 270 mm
with 3.5 HDD - 255 mm -
Height: 140 mm by default
-
Video card installation.
Connect the additional power supply of the video card before its installation, if it is provided by the manufacturer of the video card (see the instructions for installing your video card in the video card delivery kit). Unscrew the corner for fixing the video card from the case. If necessary, change the position of the riser cable for the video card. Install the video card in the riser cable and screw it to the case.
-
Installation of 2.5" drives.
Skip this step if you don't plan to use 2.5" drives.
You can connect 7 2.5" drives to the case. Please note that the thickness of the drives affects the maximum possible thickness of the video card.
-
Installation of 3.5" drives.
Skip this step if you do not plan to use 3.5" drives.
You can connect 1 3.5" drive to the case. Please note that the drive's thickness affects the maximum possible thickness of the video card.
Will screw a special mount to the drive, and then screw it to the case.
-
Installation of a radiator of liquid cooling systems (LCS).
Depending on the size of the radiator, the permissible length of the video card changes!
Skip this step if you plan to use an air cooler.
In this case, you can install a compact LCS for the CPU, for example Asetec 645LT. Screw the radiator to the case frame using countersunk screws.
Take into account that the size of the radiator affects the maximum permissible size of the video card.
-
Final Assembly.
Carefully route all cables using nylon cable ties. Check all cables are connected, including the power button cable. Now you can install the cover by fastening them with screws. Also screw the vertical stand.
